Specification

Device Type Switch

24 ports - L3 - managed - stackable

Enclosure Type

Rack-mountable

Subtype Gigabit Ethernet

Ports 8 x 100/1000/2.5G/5G/10GBase-T + 16 x 10/100/1000 (PoE+) + 2 x 25 Gigabit Ethernet

Power Over Ethernet (PoE)

PoE+

PoE Budget

 370 W

Performance

Stacking bandwidth: 80 Gbps Switching capacity: 292 Gbps Switching capacity with stacking: 327 Gbps Forwarding rate: 229.16 Mpps

Capacity

Virtual networks: 1 IPv4 routes: 11000 IPv4 routing table entries: 3000 IPv6 routing table entries: 1500 Multicast scale: 1000 ACL scale entries: 1500 FNF entries: 16000 VLANs supported: 1024 Switched virtual interfaces (SVIs): 512 QoS hardware queues per port: 8 Packet buffer size: 6 MB

MAC Address Table Size

16000 entries

Jumbo Frame Support

9198 bytes

Routing Protocol

OSPF, RIP, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP

Remote Management

Protocol SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF, IPv4, IPv6, YANG

Encryption Algorithm

128-bit AES

Features

Access Control List (ACL) support, Quality of Service (QoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Energy Efficient Ethernet, Class of Service (CoS), Flexible NetFlow (FNF), 802.1x authentication, DiffServ Code Point (DSCP) support, MACsec support, Control plane protection (CoPP), Blue Beacon LED, Zero-touch provisioning (ZTP), secure boot, Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR), Cisco StackWise-80 technology, Cisco Trust Anchor module, Cisco Unified Access Data Plane (UADP) 2.0

Compliant Standards

IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3bz

RAM

2 GB

Flash Memory

4 GB

Expansion / Connectivity

Interfaces 8 x 100/1000/2.5G/5G/10GBase-T RJ-45 16 x 1000Base-T RJ-45 PoE+ 2 x 25GBase-X uplink 1 x network stack device 1 x management (LAN) RJ-45 1 x console RJ-45

Power

Power Device Internal power supply  

hot-plug

Installed Qty 2 (max)

Power Redundancy Optional

Power Provided

600 Watt

Voltage Required AC

120/230 V (50 - 60 Hz)