ZC-RT 6KVA/5.4KW

Input

Phase
Rated Voltage
Voltage Range
Frequency Range
Power Factor
Current THDi
Current THDi
Bypass Voltage Range
Bypass Voltage Range
Bypass Voltage Range
Bypass Voltage Range
FCO Range
Generator Input

1Phase 2 Wires + Ground or3 phase 4 wires+ ground
380/400/415VAC or 220/230/240VAC
208-478Vc or 120vac-276vac
45Hz-55Hz / 55Hz-66Hz
>0.99
<3% at (100% linear load )
<5% at (100% non- linear load )
220VAC Max : voltage; 10%, 15%, 20% or 25% default : 25%
230VAC Max : voltage; 10%, 15%, 25% default : 20%
240VAC Max : voltage; 10%, or 15% default : 15%
Min:20%,30%,or45%, default : 45%
Same as the bypass
Support

Output

Phase
Rated Voltage
Power Factor
?Voltage Regulation
Frequency - Utility Mode
Frequency  - Battery Mode
Crest Factor
THD
THD
Wave Form

1Phase 2 Wires + Ground Dd
22/230/240VAC
0.9
?+/- 1%
±1%, ±2%, ±4%, ±5%, ±10% of the Frequency (optianal)
(50Hz ±1%) Hz
3:1
< 2% with Linear Load
< 5% with non  Linear Load
Pure Sine Wave

Battery

Voltage
Backup Time
Backup Time
Recharge Time to 90%
Charging Current
Battery Socket

Standard 192Vdc; Optional voltage: 216/240 Vdc
Full load ≥ 2 min(Standard) Long time unit depends on the capacity of external batteries
Estimated remaining time display on LCD
3 Hours(90% after fully discharged)
Maximum Current 10A; charge current can be set according to battery capacity installed.
Anderson Like PowerPole Modular Connectors

Transfer Time

Utility to Battery; 0ms, Utility to Bypass <4ms

Protection?

Overload   - AC Mode
Overload   - Batt. Mode
Overload   - Bypass Mode
Short Circuit
Overheat
Battery Low
Self-Diagnostics
EPO
Battery
Noise Suppression

105%~1H, 110%~125% : 10mins, 125%~150% : 1 min, ≥150% : 200ms < then tranfer to bypass
105%~1H, 110%~125% : 10mins, 125%~150% : 1 min, ≥150% : 200ms < then  shutdown UPS completely
40A(Input Breaker)
Hold Whole System
Line mode; Switch to Bypass; Backup Mode Mode, shutdown UPS immediately
Alarm and Switch off
Upon Power On and Software Control
Shutdown UPS immediately
Advanced Battery Management
Complies with EN60664-1

Alarm

Audible & Visual

Line Failure, Battery Low, Overload, System Fault

Display

Status LED & LCD
Reading on the LCD

Line Mode, Backup Mode, Eco Mode, Bypass Mode, Battery Low, Battery bad, Overload & UPS Fault
Input Voltage, Input Frequency,Output Voltage, Output Frequency, Load percentage,
Battery Voltage, Inner Temperature & Remaining Battery Backup Time

Physical

Input Connection
Output Connection
External Battery Connection

Hardwire
Hardwire & IEC320c13-10Ax2
Anderson like PowerPole Modular connectors

Communication Interface

USB , dry contract  ,parellel , communication solt

Environment

??Operating Temperature

Storage Temperature

Humidity

Altitude

Noise

0 °C - 40 ° C
25°C ~ + 55°C
0-95% non-condensing
<1500 m. (derating while > 1500m)
<55 dB (at 1 meter)

Safety Conformance

Complies with EN60664-1